Nickel 400 - Monel 400, Alloy 400, UNS N04400 Seamless Welded Pipes Tubes Manufacturers Suppliers Stockist India

Brand Nickel 400 - Monel 400, Alloy 400, UNS N04400 Seamless Welded Pipes Tubes Exporters in Mumbai India

Nickel 400 - Monel 400, Alloy 400, UNS N04400 Seamless Welded Pipes Tubes Manufacturers Suppliers Stockist India

Nickel 400 - Monel 400, Alloy 400, UNS N04400 Seamless Welded Pipes Tubes

Nickel Pipe

ALLOY 400 SEAMLESS NICKEL PIPE

Alloy 400 nickel pipe is made from a nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, marine fixtures, heat exchangers, petroleum refining and production equipment.

Stock Size Range:

OD:
.250" - 4.00"
Wall:
Schedule 10 - Schedule 80

Specifications: ASTM B165, ASME SB165, MIL-T-1368C

Typical Chemical Composition %
Nickel min. 63
Copper 28.0-34.0
Chromium 20.0-23.0
Iron 2.5
Sulfur 0.024
Carbon 0.3
Manganese 2.0
Silicon 0.5
Typical Mechanical Properties
Annealed 1000 psi Mpa
Yield Strength (0.2% offset) 31.3 216
Tensile Strength 78.6 542
Elongation % in 2 inches 52  
Rockwell Hardness 60 B
Online Inquiry

MONEL® ALLOY 400

UNS N04400

Other common names: Alloy 400

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

In what forms is Monel 400 Available at K.M Steel ?

  • Sheet
  • Plate
  • Bar
  • Pipe & Tube (welded & seamless)
  • Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
  • Wire

What are the characteristics of Monel 400?

  • Resistant to seawater and steam at high temperatures
  • Excellent resistance to rapidly flowing brackish water or seawater
  • Excellent resistance to stress corrosion cracking in most freshwaters
  • Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
  • Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
  • Excellent resistance to neutral and alkaline salt
  • Resistance to chloride induced stress corrosion cracking
  • Good mechanical properties from sub-zero temperatures up to 1020° F
  • High resistance to alkalis

Chemical Composition, %

C Mn S Si Ni Cu Fe
.30 max 2.00 max .024 max .50 max 63.0 min 28.0-34.0 2.50 max

Corrosion Resistant Monel 400

Alloy 400 is virtually immune to chloride ion stress corrosion cracking in typical environments. Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.

This nickel alloy is attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F.

Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.

In what applications is Monel 400 used?

  • Marine engineering
  • Chemical and hydrocarbon processing equipment
  • Gasoline and freshwater tanks
  • Crude petroleum stills
  • De-aerating heaters
  • Boiler feed water heaters and other heat exchangers
  • Valves, pumps, shafts, fittings, and fasteners
  • Industrial heat exchangers
  • Chlorinated solvents
  • Crude oil distillation towers

Fabrication with Monel 400

Alloy 400 can easily be welded by gas-tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals. There is no need for post weld heat treatment, however, thorough cleaning after welding is critical for optimum corrosion resistance, otherwise there is the risk of contamination and embrittlement.

Finished fabrications can be produced to a wide range of mechanical properties when proper control of the amount of hot or cold working and the selection of appropriate thermal treatments is done.

Like most other nickel alloys, Monel 400 is typically tough to machine and will work harden. However, excellent results can e obtained if you make the correct choices for tooling and machining.

ASTM Specifications

Pipe Smls Pipe Welded Tube Smls Tube Welded Sheet/Plate Bar Forging Fitting Wire
B165 B725 B163   B127 B164 B564 B366  

Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material

Product Form

Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness (HRB)
Rod & Bar Annealed 75-90 25-50 60-35 60-80
Rod & Bar Cold-Drawn Stress Relieved 84-120 55-100 40-22 85-20 HRC
Plate Annealed 70-85 28-50 50-35 60-76
Sheet Annealed 70-85 30-45 45-35 65-80
Tube & Pipe Seamless Annealed 70-85 25-45 50-35 75 max *

*The ranges shown are composites for various product sizes and therefore are not suitable for specification purposes. Hardness values are suitable for specification purposes provided tensile properties are not also specified..Online Inquiry

Alloy 400 Trivia

*Alloy 400 is slightly magnetic at room temperature.

*This alloy has a long history of use as a corrosion resistant material, dating back to the early 20th century when it was developed as an attempt to use a high copper content nickel ore. The nickel and copper contents of the ore were in the approximate ratio which is now formally specified for the alloy.

 

nickel 200 pipe
nickel 200 tube
nickel 200 sheet
nickel 200 flanges
alloy 625 pipe
alloy 59 properties
nickel 200 composition
nickel 200 wire
nickel 200 chemical composition
nickel 400
monel 400 alloy
nickel alloy 400
nickel alloy 400 properties
monel 400
monel alloy
use of monel metal
monel material properties
monel sheet metal
nickel 600
nickel metal sheets
nickel alloy 600 round rod
buy nickel 600
nickel 600 sheet
inconel 600 plate
inconel 600 sheet
p number inconel 600
inco 600 composition
Monel
inconel
monel chemical composition
monel composition
monel metal
monel alloy
monel 400
monel collection
monel price
Monel 400
monel 400 price
monel 400 welding procedure
monel 400 density
monel 400 wire
monel 400 chemical composition
monel 400 equivalent astm
monel 400 pipe
monel 400 composition
hastelloy
hastelloy vs stainless steel
hastelloy composition
hastelloy wiki
hastelloy c276
hastelloy c
inconel
hastelloy b
hastelloy c22

Available Stock at K.M Steel India

Pipes & Tubes Stock At a Glance:-
Pipe Gradewise Stock At a Glance:-
Tube Gradewise Stock At a Glance:-
Nickel Alloys Pipes & Tubes Stock At a Glance:-
Top Sellers Pipes & Tubes At a Glance:-
List of Countries where K.M Steel India supply Stainless Steel Welded Pipes & Tubes:-

List of Countries where K.M Steel India supply Pipes / Tubes :-

 


/// Quick Contact Us : +91 98697 14760

ORDER ARE PROCESSED IMMEDIATELY & SHIPPED QUICKLY. CALL +91 22 6639 4590 & SPEAK TO A MEMBER OF OUR EXPERIENCED SALES TEAM.

© K. M Steel India. All Rights Reserved . Website Design & Seo By Mesotek

K. M Steel India supply a wide variety of Nickel 400 - Monel 400, Alloy 400, UNS N04400 Seamless Welded Pipes Tubes / Manufacturer / Manufacture / Manufacturers / Stockist / Exporters / Dealers / Stockiest / large Stock / Online Price / Online Order / Production / inventory / Dealers / Suppliers / Price / Factory / Godown / Stockyard / Distributors / Supply / India