The K.M Steel India stocks a large inventory of fasteners for commercial, industrial, utility, and OEM installations. We have Fasteners such as screws, Kep Nuts , bolts, nuts, washers, and studs available in several grades and materials. Along with the standard fasteners we also stock B7 bolts & studs and stainless steel, nuts, Kep Nuts, bolts, and washers. We also carry a large inventory of mechanical anchors such as, drop-ins, wedge anchors, tapcons, lead, plastic, and hollow wall anchors.
K.M Steel India is a full line fastener distributor that stocks a wide variety of products. No matter what the specification, we can find what you're looking for. If it's not on our shelves we will outsource the product to ensure our customers' satisfaction. With K.M Steel India, there is no job to large or small. We cater to any fastener need.
K.M Steel India is a major player in the fastener industry who handles the needs of any customer. For construction, we sell Kep Nuts to all the fields with a heavy concentration in electrical, mechanical, and steel erection contractors. We have a very large inventory of Kep Nuts , specialty bolts in all of our warehouses, supplying fields such as fasteners, anchors, channel and strut accessories.
K.M Steel India has established itself as the market leader and is recognised for exceptional service, timely delivery, competitiveness, and total solutions.
we also have our sales representatives to understand the requirements of our clients, we maintain ready stock of Kep Nuts in Cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sana'a, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more...
Keps nuts are hex nuts with captive (non-removable) free-spinning lock washers, which are often external tooth. The nut turns freely during installation until the lock washer contacts and bites into the mating surface as the nut is tightened. If the mating surface is painted or plated, corrosion can occur if the lock washer penetrates and removes the surface treatment. Used in commercial and industrial applications, Keps nuts are also known as: captive washer lock nuts, Keps lock nuts, K-Lock nuts.
Since they are not prevailing torque type lock nuts, they are not "locked" until fully seated and tightened.
Threads are standard right-hand and Unified inch coarse series (UNC, Unified National Coarse) or Unified inch fine (UNF, Unified National Fine).
Keps nut size refers to its nominal thread diameter. Typically, sizes range from about #4 to 3/8". Sizes less than 1/4" are listed as a number size (the larger the number the larger the size) while sizes that are 1/4" and larger are specified in inches, usually fractional rather than decimal.
Nut width across flats, which is wrench size, and thickness vary with the size of the Keps nut.
Steel, zinc plated, is a common material and finish.
Keps nuts are popular because they are low cost, reusable and the one-piece solution saves time over installing a separate lock washer and nut. However, if either the nut or washer is damaged, both must be replaced. Since they are not prevailing torque type lock nuts, they are suitable for use on long threaded assemblies and will not gall mating threads.
|Size||Material Thickness||Across Flats A/F in mm||Hole Diameter d Ø in mm||d1 Ø in mm||d2 Ø in mm||Spigot Length||TR Part Number|
|h in mm||h 1 in mm|
|M2.5||1||5.5||4.5||4.5||4.7||3||0.9||M2.5 - -1ST TC1||Standard Spigot Ex-Stock|
|M3||1||5.5||4.5||4.5||4.7||3||0.9||M3 - -1ST TC1|
|M4||1||7||5.5||5.5||5.7||3.2||0.9||M4 - -1ST TC1|
|M5||1||8||6.5||6.5||6.75||4||0.9||M5 - -1ST TC1|
|M6||1||10||8||8||8.3||5||0.9||M6 - -1ST TC1|
|M8||2||13||10||10||10.3||6.5||1.8||M8 - -2ST TC1|
|M10||2||15||12.5||12.5||12.85||8||1.8||M10 - -2ST TC1|
|M12||3||17||14.5||14.5||14.85||10||2.8||M12 - -3ST TC1|
|M16||3||22||18.5||18.5||18.85||13||2.4||M16 - -3ST TC1|
|M20||4||27||23||23||23.4||16||3.9||M20 - -4ST TC1|
|M2.5||1.5||5.5||4.5||4.5||4.7||3||1.4||M2.5 -1.5ST TC1||Intermediate Spigot Ex-Stock|
|M3||1.5||5.5||4.5||4.5||4.7||3||1.4||M3 - 1.5ST TC1|
|M4||1.5||7||5.5||5.5||5.7||3.2||1.4||M4 - 1.5ST TC1|
|M5||1.5||8||6.5||6.5||6.75||4||1.4||M5 - 1.5ST TC1|
|M6||1.5||10||8||8||8.3||5||1.4||M6 - 1.5ST TC1|
|M2.5||2||5.5||4.5||4.5||4.7||3||1.8||M2.5 - -2ST TC1||Long Spigot Ex-Stock|
|M3||2||5.5||4.5||4.5||4.7||3||1.8||M3 - -2ST TC1|
|M4||2||7||5.5||5.5||5.7||4.5||1.8||M4 - -2ST TC1|
|M5||2||8||6.5||6.5||6.75||5||1.8||M5 - -2ST TC1|
|M6||2||10||8||8||8.3||5||1.8||M6 - -2ST TC1|
K Lock Nuts
FOB Price: US $1800-3500 / Ton
DELIVERY: Ex Stock or 15-30 DAYS or AS COMMUNICATION
Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
Port of Dispatch : CST Air Port, Mumbai & Nhava Seva Sea Port
Production Capacity : 500 Metric Tons/Month
For quick Quote For Kep Nuts, please contact our Sales team.
ORDER ARE PROCESSED IMMEDIATELY & SHIPPED QUICKLY. CALL +91 22 6639 4590 & SPEAK TO A MEMBER OF OUR EXPERIENCED SALES TEAM.